Erdmann Hobler

holtdreier
Beiträge: 8
Registriert: Do 8. Mär 2018, 14:55

Re: Erdmann Hobler

Beitrag von holtdreier » Mo 4. Feb 2019, 10:12

Päivä jpt

Nice to hear from you.
This is simple 'bowden-cable' technology, nothing special.
It will be of more interest, how the push- and pull-rod coming from the left side in your 2nd picture (which acts the leaver for the bowden-cable) is mounted and (resitance) controlled.
Do you have the opportunity to make some pictures from as well the mounting of this rod as the other end of your bowden-cabel, which should go direct into the tool-lifting mechanism-leaver in front of the ramm. Then I can tell more. (I made all this stuff by my own, so nothing is original there anymore.)
You will properbly know, but you will find all clamps and sleeves (?, hulls at the end of the outer-tube of the bowden-cable) at your bicycle- or motorcycle-store.

BR
Holtdreier

jpt
Beiträge: 5
Registriert: Fr 23. Nov 2018, 11:38
Finland

Re: Erdmann Hobler

Beitrag von jpt » Mi 6. Feb 2019, 19:41

Here is one picture of the whole mechanism. The cable part should be fairly easy. I just have to make a part that will fasten the loose end of the cable to the lever that the rod is moving.
erdmann3.jpg

holtdreier
Beiträge: 8
Registriert: Do 8. Mär 2018, 14:55

Re: Erdmann Hobler

Beitrag von holtdreier » Do 7. Feb 2019, 09:27

Perfect!
That's nothing. Lucky you, everything's still at it's place. Dont forget the kind of 'sleeve' for the end of the bowdenkabel.

Kiitos for sharing the picture and have fun with this nice little toy.

Holtdreier

Antworten